Casio ClassPad 300 PLUS - Page 564

20050501
plotTest(
Syntax: plotTest(<x-coordinate>, <y-coordinate>)
Function: Returns 1 when the dot at the specified coordinates is on, and 0 when it is off.
Example: plotTest(2,–3)
SS
SS
S a. Result is placed in a.
Description: Only dots within the screen are valid.
PTBrokenThck
Syntax: PTBrokenThck 䡺 <graph number>
Function: Specifies “Broken Thick” ( ) as the graph line type.
Description: Graph number range: 1 to 100
PTCross
Syntax: PTCross 䡺 <graph number>
Function: Specifies “Cross Plot” ( ) as the graph line type.
Description: Graph number range: 1 to 100
PTDot
Syntax: PTDot 䡺 <graph number>
Function: Specifies “Dot Plot” ( ) as the graph line type.
Description: Graph number range: 1 to 100
PTNormal
Syntax: PTNormal 䡺 <graph number>
Function: Specifies “Normal” (—) as the graph line type.
Description: Graph number range: 1 to 100
PTSquare
Syntax: PTSquare 䡺 <graph number>
Function: Specifies “Square Plot” ( ) as the graph line type.
Description: Graph number range: 1 to 100
12-6-19
Program Command Reference