Casio CT-S200 User Manual

Playing a Built-in Song
EN-20
You can configure count settings to sound a count in time with
a song and to sound a pre-count before a song starts.
1. While the song stopped, press the COUNT
button.
Press the button a number of times until “CNT” appears
on the display.
2. Press a to start the song.
A count sounds as the song is played back.
• To turn off the count, stop the song and then press the
COUNT button a number of times until “CNT”
disappears from the display.
• While a count is sounding, the beat is not displayed while a
song is playing.
1. While the song stopped, press the COUNT
button.
Press the button a number of times until “PRE” appears
on the display.
2. Press a to start the song.
This sounds a pre-count that helps you determine when
to start playing along.
• To turn off the pre-count, stop the song and then press
the COUNT button a number of times until “PRE”
disappears from the display.
• While the pre-count is enabled, the beat is not displayed
while a song is playing.
Sounding a Count in Time with a
Song
Sounding a Count
Sounding a Pre-count

Casio CT-S200 Specifications

General

Keyboard	61 keys
Polyphony	48 notes
Tones	400 built-in tones
Rhythms	77 built-in rhythms
Speakers	2 x 2.5W
Dance Music Mode	Yes
Lesson Function	Yes
Touch Response	No
Song Bank	60 built-in songs
Metronome	Yes
Transpose	Yes
Connectivity	Audio In (3.5mm Stereo Mini Jack), USB to host
Power Supply	AC adapter or 6 AA batteries
Weight	3.3 kg (without batteries)
Dimensions	93.0 x 25.6 x 7.3 cm
App Connectivity	Chordana Play for Piano
Effects	Reverb
Tuning	A4 = 415.5 to 465.9 Hz
MIDI	Yes
Audio Input	3.5mm stereo mini jack
Audio Output	3.5mm stereo mini jack
Amplifiers	2.5W + 2.5W