Casio CT-S200 - Data Entry (06 H,26 H); Volume (07 H); Pan (0 AH); Expression (0 BH)

8.4 Data Entry (06H,26H)
Message Format: BnH 06H mmH (MSB)
BnH 26H llH (LSB)
n: MIDI Channel Number
mm: MSB Value
ll: LSB Value
Transmit Sent when there is a change to the parameter assigned to RPN.
Receive Receipt changes the parameter assigned to RPN.
8.5 Volume (07H)
Message Format: BnH 07H vvH
n: MIDI Channel Number
vv: Value
Receive Receipt changes the volume of the corresponding part.
8.6 Pan (0AH)
Message Format: BnH 0AH vvH
n: MIDI Channel Number
vv: Value(Note1)
Note1 : For information about the relationship between setting values and send/receive values, see “15.3 Pan Setting Value
Table” in “IV Setting Values and Send/Receive Values”.
Receive Receipt changes the pan of the corresponding part.
8.7 Expression (0BH)
Message Format: BnH 0BH vvH
n: MIDI Channel Number
vv: Value
Receive Receipt changes the Expression value of the corresponding part.
8.8 Damper Pedal (Sustain) (40H)
Message Format: BnH 40H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “15.1 Off/On Setting
Value Table” in “IV Setting Values and Send/Receive Values” of this document.
8