English
Saving Keyboard Setups to Registration Memory
EN-21
1.
Configure the tone, rhythm, and other settings
you can to include in the setup.
2.
Press
br
(BANK) to select the bank you want.
Each press of
br
cycles through the bank numbers.
3.
While holding down
cm
(STORE), press a
button from
bs
(Area 1) to
cl
(Area 4) to select
an area.
This will save the settings you configured in step 1 into the
applicable setup.
• If there is anything already stored in the setup, it will be
replaced (deleted) by the new setup.
1.
Press
br
(BANK) to select the bank that
contains the setup you want to recall.
2.
Use buttons
bs
(Area 1) to
cl
(Area 4) to select
the area whose setup you want to recall.
This will recall the registration memory setup and
automatically configure the Digital Keyboard settings
accordingly.
To save a setup to registration
memory
Bank
Store
Stored in Setup 4-1
To recall a setup from registration
memory
Bank
Reca l l
Setup 6-1 recalled
CTK3400SK_A5_x1a_EN_ES.indd 23 2013/10/09 18:58:26
To Next Page
Loading...
