English
Recording Your Keyboard Play
EN-23
7.
Press
bn
(RECORDER) twice to exit the
recorder mode.
• The flashing on the screen shown in step 2 becomes
faster when remaining recorder memory capacity
becomes less than 100 notes.
• Total recorder memory capacity is approximately 2,000
notes. Recording will stop automatically when there is
no more unused recorder memory remaining.
• Each press of
bn
cycles through the settings shown
below. You can listen to the recorded data as many
times as you like by pressing
bl
while in playback
standby.
■ To delete recorded data
After step 1 of the above procedure, do hold down
bn
(without pressing any keyboard key) until the message
“SongDel?” appears on the display. Press [+] (YES) to delete
the data, or [–] (NO) to cancel the delete operation.
• Turning off the Digital Keyboard while recording is in
progress will cause any data in recorder memory to be
deleted.
• A new recording replaces (deletes) previously recorded
contents.
In addition to what you play on the keyboard, the following
information also is recorded.
Settings:
Tone number, rhythm number, tempo, reverb, chords,
layer/split settings, Pitch Bend Range setting
Operations:
Pedal, INTRO button, SYNCHRO/ENDING button,
NORMAL/FILL-IN button, VAR./FILL-IN button, TOUCH
button, PITCH BEND wheel
Disappears
Recorder Off
Playback
Standby
Record Standby
Song Recording Data
CTK3400SK_A5_x1a_EN_ES.indd 25 2013/10/09 18:58:26
To Next Page
Loading...
