Playing the Digital Keyboard
EN-12
1.
Press
ct
(FUNCTION) and then use the
br
(10-key) [4] (o) and [6] (p) keys to display
“OTHER” (page EN-7).
2.
Press
br
(10-key) [9] (ENTER) key.
3.
Use the
br
(10-key) [4] (o) and [6] (p) keys
to display “Contrast”.
4.
Use the
br
(10-key) [–] and [+] keys to adjust
the contrast.
• The contrast setting range is 01 to 17.
The metronome lets you play and practice along with a steady
beat to help keep you on tempo.
1.
Press
5
.
This starts the metronome.
2.
Press
5
again to stop the metronome.
You can configure the metronome to use a bell sound for the
first beat of each measure of the song you are playing.
• You can specify a value from 0 to 9 as the number of beat
per measure.
• When playing a built-in song, the beats per measure setting
(which determines when the bell sounds) is configured
automatically for the currently selected song.
1.
Hold down
5
until the beats per measure
setting screen appears on the display.
• If you do not perform any operation for a few seconds
after the beats per measure setting screen appears, the
display will return to the screen displayed before you
pressed
5
.
2.
Use
br
(10-key) to enter the number of beats
per measure.
• The bell will not sound if you specify 0 (Bell Off) for this
setting. In this case, all beats are indicated by a click
sound. This setting lets you practice with a steady beat,
without worrying how many beats there are in each
measure.
Adjusting Display Contrast
Flashes
OTHER
Con t r a s t
Using the Metronome
Start/Stop
Changing the Beats Per Measure
This pattern changes with each beat.
Bea t
CTK860IN_A5_x1a_EN.indd 14 2014/07/10 18:06:38
To Next Page
Loading...
