Casio CZ-3000 User Manual

POLY MODE AND
MONO
MODE
In the poly mode, the
CZ-3000 is
capable of exchanging polyphonic
data . As previ-
ously
mentioned, the send and
receive channels
must match at this time.
In the mono mode,
the CZ-3000
can act as a monophonic
synthesizer, able to receive
and play
independent timbres in
each channel.
Using
the CURSOR
and VALUE keys to change
the settings
in Fig-
6
to CH
-
01
(8)
results En 8 voice channels
starting
with basic channel
L
Similarly, in
the case of
CH
=
03
(3),
channels
3,
4 and 5 are each equivalent to
monophonic
synthesizers. At this
time, the remaining
sound sources (8-3
=
5)
can
be used
for keyboard play.
The timbre from
2
DCO
(selecting
1
+
2'
or 1 + V with the LIME
SELECT key) results
in
5-note polyphonic, while 1 DCO
(selecting 1 or
2)
results
in 10-note polyphonic.
Since all
sound sources
are used as MIDI channels
when the voice
channel setting
is
8,
the keyboard becomes
inoperable.
The lamps that
are lit on the console of
the CZ-3000 do
not indicate data received
through the
MIDI. They show
the status of CZ-3000 timbres
and effects.
MIDI data
3 monophonic synthesizers
Remaining sound sources
(5
or 10 polyphonic)
USE
AS A MCJLTI-TIMBRAL
EXPANDER
U
When using the
CZ-3000 as
a multi-timbral expander, it is possible
to choose the
preset/memory
voice for each MIDI
channel. To get into the multi-timbral mode,
press the MIDI button and
change the
mode from "P" to "M
M
with the value
key.
Then, move
the cursor to the "CH
=
0V
indicator and choose
the bottom number
of consecutive
channels you
want to receive on. Move
the cursor underneath the
"(1)"
to set the desired number
of channels.
As an example, if the "CH
=
"
is
set
to "CH
=
04'
r
,
and the other setting is
^(6)"\
the machine will
respond to incoming
data on channels
4, 5, 6
f
7, 8 and
9,
and there will still 2 voices
left over
(6 + 2
=
8 total).
Mow set voices
for each MIDI
channel by the following
method: connect
a MIDI
cable From the "MIDI
OUT" directly
into the "MIDI IN", Set the "KBCH
=
"
to
chan-
nel
4
and choose
a preset/memory number.
Switch
to ''KBCH
=
5"
and
choose
a
voice, and just keep switching
the "KBCH'
1
number until
a
voice is
selected
for
each
channel
desired.
M.MODE
KBCH=01
CH=04<6)
PRG=ENfl
IT 4 MIDI
33

Casio CZ-3000 Specifications

General

Brand	Casio
Model	CZ-3000
Category	Synthesizer
Language	English