11
Filament bulb/luminescent tube
3,000 Lux or less
Resistance to external disturbance
Sunlight 80,000 Lux or less
Readable bar code symbologies EAN, UPCA, UPCE, NW7, ITF,
MSI, Industrial 2of5, CODE39,
CODE93, CODE128, EAN128,
IATA
Laser scanner
LED for confirmation In green color
Communication
Communication mode IrDA Ver. 1.1 compatible and
Casio original infrared
communication
Synchronization Async, Frame
Protocol Half-duplex
IrDA
Baud rate (bps) 2400/9600/19200/38400/57600/11
5200/4M
Standard Bluetooth Specification Ver.1.2
Profile Serial profile
Communication range Approx. 5m
Bluetooth
Output power 3dBm ( Power Class2)
Power supply
Standard Option Battery type
AA-size alkaline
battery x 2
DT-923LIB Lithium-ion
battery pack x 1
Nominal voltage DC 1.5 V x 2 DC 3.6 V
Operating hours (Note 1) Approx. 200 Approx. 50
Operating
battery
Backup period (with only main
battery (Note 2)
5.0 months 1.5 months
Battery type Button-type lithium battery (CR2032) x 1 Memory
backup
battery
Backup hours (with only backup
battery)
1 month
Type Function Operation status
LB0 (main battery) Absence of battery Forced OFF
LB1 (main battery) Battery used Operable
Low
battery
voltage
warning
LB2 (sub-battery) Battery used or not
present
Backup not possible
Pin No. 1 VCHG Recharging Terminal
4.2V, 300 mA max.
Pin No.2 XIRCNT Basic cradle control
signal
Pin No.3 VADP Power supply terminal
5 V, 400 mA max.
Pin No.4 GND Ground
Power
contacts
Layout of terminals
Notes:
1. At ambient temperature 25۫۫ºC, and scanning twice in every 10 seconds.
2. At ambient temperature 25ºC, and with fully charged Lithium-Ion battery pack (or two new
AA-size alkaline batteries).
To Next Page
Loading...