30
6.10.3. Notes About Chain Connection
Cable layout
Take the followings into consideration when routing the cables from each Cradle:
• Compression, extension, bending due to heavy load
• Attachment to a movable part
• Routing over a sharp edge
• Routing near a strong electric field
Note:
Improper routing of a cable may cause a cable fault or a short circuit, damaging proper
communication.
Do not route cables near precision equipment (measuring equipment, etc.), a radio or television
receiver, or wireless equipment. If cables are routed near such a piece of equipment, it may be
subject to electrical interference.
Precautions to be observed when manufacturing cables
• If the CASIO cables cannot be used, and custom-made cables are required instead, use the
manufacturer-specified cramping tool to cramp the modular connector and cable. Note that
defective cramping may damage communication.
• Cables for Basic Cradle are designed for cross-type connection. Note that the number of core
wires and connection method are different from those for the DT-964IOE Satellite Cradle.
To Next Page
Loading...