46
7.10.3. Precautions
Cable Layout
Take the following into consideration when routing the cables leading from each Cradle:
• Compression, extension, bending due to heavy load
• Attachment to a movable part
• Routing over a sharp edge
• Routing near a strong electric field
Note:
Improper routing of a cable may cause a cable fault or a short circuit, damaging proper
communication.
Do not route cables near precision equipment (measuring equipment, etc.), a radio or television
receiver, or wireless equipment. If cables are routed near such a piece of equipment, it may be
subject to electrical interference.
Precaution to be observed when manufacturing cables
• If CASIO cables cannot be used, and custom-made cables are required, use the manufacturer-
specified cramping tool to cramp the modular connector and cable. Note that defective
cramping may damage communication.
To Next Page
Loading...