DT-X200 Hardware Manual P.10
3. Hardware Specifications
3.1. Specification
3.1.1. DT-X200
Item Specification Remark
ＣＰＵ
Marvell PXA320 806MHz
ＯＳ
Windows Embedded Compact7
Memory RAM
256MB
FROM
512MB
Laser Scanner Laser emit angle
Redirected downward at 7 degree
Wave Length
645
～
664nm
Optical Output
< 1mW
No. of scanning
100±20 scan/sec
Resolution
0.127mm(minimum) or greater
PCS
0.45(minimum) or greater
Readable distance
Approximately 40mm to 550mm
Readable width
Max. 424mm
- at 550mm depth
Daylight for scanning
50,000 Lux or less
Readable bar code
symbologies
UPC-A/UPC-E/EAN8(JAN8)/EAN13(JAN13)/Codabar(NW-7)/Code39
Interleaved2of5(ITF)/MSI/Industrial2of5/Code93/Code128(EAN128)
/IATA/GS1 DataBarOmnidirectional(RSS-14)/GS1
DataBarLimited(RSS Limited)/GS1 DataBar Expanded(RSS
Expanded)/GS1 DataBar Stacked(RSS-14 Stacked)/GS1 DataBar
Expanded Stacked(RSS Expanded Stacked)/GS1 DataBar
Truncated(RSS-14 Stacked)/
GS1DataBar Stacked Omnidirectional(RSS-14 Stacked
C-MOS Method
CMOS Imager, 832 x 640, monochrome
Imager Aimer method
Laser 650nm, <1 mW
Laser emit angle
Redirected downward at 30 degree
Resolution
1D：0.127mm(minimum) or greater
2D Stacked：0.168mm(minimum) or greater
2D Matrix
：
0.191mm(minimum) or greater
PCS
0.45(minimum) or greater
Readable distance
1D : Resolution0.25mm ： 48～250mm
1D : Resolution0.5mm ： 72～400mm
2D stacked Resolution 0.25mm
：
43
～
230mm
2D matrix Resolution0.25mm
：
67
～
150mm
2D matrix Resolution0.5mm
：
51
～
300mm
Readable width
Max. 39mm（at 48mm depth）
Max. 275mm
（
at 400mm depth
）
Focal distance
5.0 inches
Daylight for scanning
50,000 Lux or less
Readable 1D
symbologies
UPC-A/UPC-E/EAN8(JAN8)/EAN13(JAN13)/Codabar(NW-
7)/Code39/Code11
Interleaved2of5(ITF)/MSI/ISBT/Code93/Code128(GS1-
128(EAN128)/GS1 DataBarOmnidirectional(RSS-14)/GS1
DataBarLimited(RSS Limited)/GS1 DataBar Expanded(RSS
Expanded)/Code32/GS1 DataBar Truncated（RSS-14 Truncated）
Readable Stacked 2D
symbologies
To Next Page
Loading...
