Casio DT-X5M10E - Remove the 1 D Laser; Remove the Battery Holder;Battery Pack

— 12 —
Removing the 1D Laser
1. Remove the battery holder/battery pack (see page 9), and separate the front and rear case assemblies (see
page 10).
2. Remove screws 1 - 2, and release cable 3 from its locking collar.
3. Lift the 1D laser assembly , off the front case assembly.
Figure 2 - 4 - Removing the 1D Laser
4. 1D Laser Assembly
• 2 Screws
4