E-25
Setting the Display Brightness
Adjusting Display Brightness
You can use the following procedures to adjust display brightness to make it easier to
read under different lighting conditions.
Press the “Fn” key and then press the “5” key or “6” key after confi rming that “F” is
displayed on the screen. Pressing the “5” key adjusts brightness for a darker display,
while pressing the “6” key adjusts brightness for a lighter display.
∗
In order to continue to make adjustments, press the “5” key or “6” key again after
fi rst pressing the “Fn” key.
∗
You can set the brightness by tapping “Brightness” in the Control Panel.
Display Auto Dimmer
The display auto dimmer automatically lowers display brightness if you do not
perform any operation for a specifi c period of time. This helps the battery power to be
conserved.
Tap “Brightness” in the Control Panel and select the “Backlight” tab to set the time
delay until the display dims.
•
To Next Page
Loading...
