E-58
Charging Battery Pack
Use the optional AC adaptor (AD-S90190C) to supply power to the charger.
1. Plug the connector from the AC adaptor into the AC adaptor jack on the dual battery
charger with the engraved side of the connector facing upwards. Push the connector
fi rmly into the jack until it clicks into place.
2. After connecting the power cable to the AC adaptor, plug the other end of it into an
AC outlet.
3. Turn on the power switch on the side of the charger. The power LEDs on the top of
the charger light red.
To Next Page
Loading...
