Casio Edifice EQB-700 User Manual

Configuring Dual Time
Settings
Dual Time lets you keep track of the current
time in another time zone in addition your
current location time.
30
Dual Time 24-hour
Dual Time
1.
Pull out the crown to the first click.
2.
Rotate
the
crown to change the Dual Time
setting.
●
You can
set the Dual Time in 15-minute
increments.
●
You can
find out whether the Dual Time
is showing an a.m. or p.m. time by
checking the small 24-hour hand.
Crown
Small hour and minute hands
Small 24-hour hand
3.
Push the crown back in.
Swapping Your Current
Location Time and Dual Time
You can swap your Home Time with the Dual
Time by holding down (A) for about three
seconds.
30
30
After swappingBefore swapping
Current location time
Current location time
Dual Time
Dual Time
Note
●
If the current times were set
manually on the watch (not
automatically by the phone), the
dates will not be swapped. Only the
times are swapped.
Hand Alignment
Correction
Strong magnetism or impact can cause the
time indicated by the hands and the day
indicator to go out of alignment. If this
happens, correct hand alignment.
To correct hand alignment
1.
Pull out the crown to the first click.
2.
Hold down (C) for about five seconds.
This enables adjustment of second and
minute hand alignment.
30
Minute hand
Second hand
3.
Rotate the crown to align the second and
minute hands with 12 o’clock.
4.
Press (B).
This enables adjustment of hour hand
alignment.
30
Hour hand
5.
Rotate the crown to align the hour hand
with 12 o’clock.
6.
Press (B).
This enables adjustment of small hour
and minute
hand, and small 24-hour hand
alignment.
30
Small minute hand
Small hour hand
Small 24-hour hand
7.
Rotate the crown to align the small hour
and minute hands, and the small 24-hour
hand with 12 o’clock.
Operation Guide 5467
10

Casio Edifice EQB-700 Specifications

General

Brand	Casio
Model	Edifice EQB-700
Category	Watch
Language	English