5.
Y Select the summer time switching
method you want to use.
●
“Auto”
The watch switches between standard
time and summer time automatically.
●
“OFF
”
The watch always indicates standard
time.
●
“ON”
The watch always indicates summer
time.
6.
Perform the operation shown on the
phone screen.
Note
●
When “Auto” is selected for
standard/summer time switching,
the watch will switch between
standard time and summer time
automatically. Do not need to
change the
time setting manually for
changes between summer time and
standard time. Even if you are in an
area that does not observe summer
time, you can leave the watch’s
summertime setting as “Auto”.
●
Changing the time setting manually
with a watch operation will cancel
auto standard time/summer time
switching.
●
A CASIO WATCH+ screen shows
information about summer time
periods.
●
Swapping Your World Time and Home
Time
1.
Y Tap the
“CASIO WATCH+” icon.
2.
X
Hold down the (B) button for about 1.5
seconds.
●
The day of the week hand will move to
“R”. Keep
(B) depressed until the day of
the week hand starts moving again and
then stops at “R”.
●
The day of the week hand will move to
e when a connection is established
between the watch and phone.
3.
Y Tap z.
4.
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
For example, if your Home City is Tokyo
and the
World Time City is New York, they
will be swapped as shown below.
30
30
World Time City
(New York)
World Time City (Tokyo)
Home City (New York)
Home City (Tokyo)
After swappingBefore swapping
Note
●
Auto time adjustment is not
performed for 24 hours after
swapping of the Home Time and
World Time.
Correcting Hand Alignment
If the hands are out of alignment even though
auto time
adjustment is being performed, use
CASIO WATCH+ to adjust them.
1.
Y Tap the “CASIO WATCH+” icon.
2.
X
Hold down the (B) button for about 1.5
seconds.
●
The day of the week hand will move to
“R”.
Keep (B) depressed until the day of
the week hand starts moving again and
then stops at “R”.
●
The day of the week hand will move to
e when a connection is established
between the watch and phone.
3.
Y Tap in the following sequence: f n
“Watch settings”.
4.
Y Tap
“Adjusting home positions
”.
5.
Y Perform the operation shown on the
phone screen.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in the
manner mode.
Important!
●
Do not use this function in areas
where phone call tones are
restricted.
●
The tone sounds at a high volume.
Do not use this function when
listening to phone output over
earphones.
1.
X If the watch is connected with a phone,
press (B) to terminate the connection.
30
30
After disconnectionConnected
Operation Guide 5467
6
To Next Page
Loading...
Need help?
General