E-16
For details about the operating time and daily operating conditions, see the “Power •
Supply” section of the Specifi cations (page E-73).
Power Saving
Power Saving enters a sleep state automatically whenever the watch is left for a
certain period in an area where it is dark. The table below shows how watch functions
are affected by Power Saving.
There actually are two sleep state levels: “second hand sleep” and “function sleep”. •
Elapsed Time in Dark Operation
60 to 70 minutes (second hand
sleep)
x Second hand only is stopped at 12 o’clock, all other
functions are enabled.
6 or 7 days (function sleep)
All functions, including analog timekeeping, disabled •
Internal timekeeping maintained. •
The watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch •
is already in a sleep state when 6:00 AM arrives, however, it will remain in the sleep
state.
To Next Page
Loading...
Need help?
General