E-38
Confi guring Current Time and Date Settings Manually
You can confi gure current time and date settings manually when the watch is unable
to receive a time calibration signal.
To change the current time setting manually
In the Timekeeping Mode, keep 1. A depressed (for about
fi ve seconds) as the
x Second Hand goes through the
following sequence.
Moves to the last signal reception result (
• Y or N), then
to READY (or R for some models), and then to the city
code of the currently selected Home City.
At this time, the • v Left Dial Hand will indicate the
Home City’s current daylight saving time setting (STD
or DST).
@>
To Next Page
Loading...
Need help?
General