E-25
What you should do next depends on whether you are using Auto Receive or 3.
Manual Receive.
Auto Receive: Leave the watch over night in the location you selected in step 2.
•
See “Auto Receive” on page E-25 for details.
Manual Receive: Perform the operation under “To perform manual receive” on •
page E-26.
Auto Receive
With Auto Receive, the watch performs the receive operation each day
•
automatically up to six times (up to fi ve times for the Chinese calibration signal)
between the hours of midnight and 5 a.m. (according to the Timekeeping Mode
time). When any receive operation is successful, none of the other receive
operations for that day are performed.
When a calibration time is reached, the watch will perform the receive operation
•
only if it is in the Timekeeping Mode or World Time Mode. The receive operation is
not performed if a calibration time is reached while you are confi guring settings.
To Next Page
Loading...
Need help?
General