Casio EX-Z1050 - Page 34

— 32 —
24. Fit the strap on the rear panel.
25. Set the rear panel.
■ Assembling the CASE
22. Set the plate.
23. Set the rear panel.
plate
26. Assemble with 14 screws.
Strap
Screws (S4)
Torque: 8.0 ± 1.0 N•cm
Screws (S3)
Torque: 8.0 ± 1.0 N•cm
Screws (S3)
Torque: 8.0 ± 1.0 N•cm
Screws (S1)
Torque: 8.0 ± 1.0 N•cm
Screws (S2)
Torque: 8.0 ± 1.0 N•cm