— 27 —
ASSEMBLY
FOR THE SCREWS WITH A TORQUE VALUE INDICATED, USE A TORQUE DRIVER AND
TIGHTEN IT ACCORDING TO THE VALUE INDICATED ON THE SCREW.
3. Set the buttery frame and fix it with three hooks.
Hooks
Buttery frame
JACK cover
■ Assembling the buttery case assy
1. Set the JACK cover.
2. Set the buttery case and fix it with two screws.
Screws (S2)
■ Assembling the strobe unit
4. Set the strobe unit.
Strobe unit
To Next Page
Loading...
