108
Advanced Settings (REC MENU)
*1 Functions that can be assigned depend on the recording mode.
*2 Configure the settings below in order to directly adjust focus with the function ring.
Focus Mode: MF (Manual Focus)
Face Detection: Off
Smooth Skin: 0 (Off)
*3 The control dial operates as described below in the M (Manual Exposure)
recording mode.
• When a function other than “Aperture” is assigned to the function ring (page
107), rotating the control dial adjusts aperture.
• When “Aperture” is assigned to the function ring, rotating the dial adjusts
shutter speed.
*4 When performing the operations below, the functions assigned to the left and right
keys are fixed and are not affected by the functions you assign to them with Key
Customize “L/R Key”.
• When “MF” is selected as the focus mode, the left and right keys perform focus
adjustment.
• When “I Multi” is selected as the AF area setting, the left and right keys shift
the focus area.
Control Dial
*
3
Exposure Corrects brightness.
Page 51
White Balance Adjusts hue.
Page 45
ISO
Changes the ISO sensitivity
setting.
Page 49
ISO High Limit
Specifies the ISO sensitivity high
limit.
Page 110
Self-timer Selects the self-timer time.
Page 44
Focus Changes the focus mode.
Page 47
Off No function assigned to the dial.
L/R Key
*
4
CS Enters the CS Mode.
Page 60
Exposure Corrects brightness.
Page 51
White Balance Adjusts hue.
Page 45
ISO
Changes the ISO sensitivity
setting.
Page 49
Metering Changes the Metering Mode.
Page 54
Self-timer Selects the self-timer time.
Page 44
Motion Shutter
Specifies the Motion Shutter
activation operation.
Page 65
Off
No function assigned to the [4]
and [6] keys.
Operation Setting Description
See page:
To Next Page
Loading...
Need help?
General
