32
Snapshot Tutorial
IMPORTANT!
• You may not be able to achieve the brightness you want when shooting an image
that is very dark or very bright. If this happens, use the M mode to adjust the
aperture or shutter speed manually.
• In the S mode, ISO sensitivity (page 44) always operates according to its “AUTO”
setting. The ISO sensitivity setting cannot be changed while in the S mode.
• While A, S, or M is selected for the recording mode, the flash will not fire if >
(Auto Flash) or ¥ (Red Eye Reduction) is selected as the flash mode. If you want
the flash to fire, select < (Flash On) as the flash mode.
• The displayed ISO sensitivity, shutter speed or aperture value will turn orange
when you half-press the shutter button if the image is overexposed or
underexposed.
S S (Shutter Speed Priority) mode
In this mode, you select the shutter speed and other
settings are adjusted accordingly.
1
Press [SET] to open the Control Panel.
2
Use [8] and [2] to select the third Control Panel
option from the bottom (shutter speed).
3
Use [4] and [6] to change the shutter speed setting.
• You also can select the EV shift setting located under the shutter speed
setting and then specify an exposure value (EV shift), if you want.
M M (Manual Exposure) mode
This mode gives you total control over aperture and
shutter speed settings.
1
Press [SET] to open the Control Panel.
2
Use [8] and [2] to select the third Control Panel
item from the bottom (aperture).
3
Use [4] and [6] to change the aperture setting.
4
Use [8] and [2] to select the second Control Panel
item from the bottom (shutter speed).
5
Use [4] and [6] to change the shutter speed
setting.
Shutter speed
Aperture value
Shutter speed
To Next Page
Loading...
Need help?
General
