54
Snapshot Tutorial
The Silent mode automatically disables flash, mutes operation tones, and configures
other settings to avoid disturbing others around you. It comes in handy when shooting
in a museum or other areas where flash photograph is prohibited.
1. Set the mode dial to m (Silent).
This enters the Silent mode, which is indicated by m (Silent) on the monitor
screen. The following shows the camera setup in the Silent mode.
• As shown in the example to the right, Flash and Self-timer are not
included in the control panel. This means that these settings cannot be
changed from the Control Panel.
• See the following for details.
– Flash (page 37)
– AF Assist Lamp (page 75)
– Self-timer (page 45)
– Sounds (page 142)
– Screen (page 141)
Shooting without Disturbing Others (Silent Mode)
Flash Off
AF Assist Lamp Off
Self-timer Off
Sounds Off
Screen –1 to 0
To Next Page
Loading...
Need help?
General
