44
Snapshot Tutorial
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the fifth Control Panel option from the top
(AF Area).
3. Use [4] and [6] to select the setting you want and then press [SET].
4. Point the camera at the subject and half-press the shutter button. Wait
until the camera adjusts exposure and focus automatically.
Specifying the Auto Focus Area (AF Area)
Intelligent
The camera automatically determines the focus point on the
screen and focuses there (intelligent AF).
• Face detection (page 47) operates automatically.
Spot
This mode takes readings of a small area in the center of the
image. This setting works well with focus lock (page 43).
Multi
When you half-press the shutter button while this setting selected,
the camera will select the optimum Auto Focus area from among
nine possible areas. The focus frame of the area where the
camera focuses will be displayed in green.
Tracking
Half-pressing the shutter button focuses on the subject and causes
the focus frame to track the movement of the subject.
To Next Page
Loading...
Need help?
General
