87
Using the Camera with a Computer
Using the Camera with a Computer
You can perform the operations described below while the camera is connected to a
computer.
* Windows only
The procedures you need to perform when using the camera with your computer and
when using the bundled software are different for Windows and the Macintosh.
Things you can do using a computer...
Save images to a
computer and
view them there
• Save images and view them manually (USB
connection) (pages 89, 98).
• Transfer images to a computer
automatically over a wireless LAN for
viewing (Eye-Fi) (page 103).
Transfer images
stored on your
computer to
camera memory
In addition to images, you also can transfer
screen shot images from your computer to the
camera (Photo Transport*) (page 95).
Playback and
edit movies
• You can play back movies (pages 93, 101).
• To edit movies, use commercially available
software as required.
• Windows users should refer to “Using the Camera with a Windows Computer”
on page 88.
• Macintosh users should refer to “Using the Camera with a Macintosh” on page
98.
To Next Page
Loading...
