19
Quick Start Basics
NOTE
• Each country controls its local time offset and the use of summer time, and so they
are subject to change.
• Removing the battery too soon after you set the time and date can cause the date
and time display to become incorrect. Do not remove the battery for at least 24
hours after configuring settings.
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
• For information about memory card capacities, see page 136.
– SD Memory Card
– SDHC Memory Card
Use one of the above types of memory card.
1. Press [ON/OFF] to turn off the camera and
then open the battery cover.
Slide the battery cover slider towards OPEN and
then open it as indicated by the arrows in the
illustration.
2. Load a memory card.
Positioning the memory card so its
front is facing upwards (in the direction
of the monitor screen), slide it into the
card slot all the way in until you hear it
click securely into place.
Preparing a Memory Card
Supported Memory Cards
To load a memory card
2
1
Front Back
Front
To Next Page
Loading...
Need help?
General
