Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
●
Note that alarm and timer tones will still
sound even while the operation tone is
muted.
Configuring Power Saving
Function Settings
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
Release the button when the city code
starts to flash.
3. Press (C) 11 times.
This displays [PS].
4. Press (D) to toggle between on and off.
[On]: Power Saving enabled.
[OFF]: Power Saving disabled.
5. Press (A) to complete the setting
operation.
Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
●
For details about Power Saving, refer
to the information below.
l
Power Saving Function
Other Information
This section provides non-operational
information you also need to know. Refer to
this information as required.
City Table
City Offset
UTC
Coordinated
Universal Time
0
LIS Lisbon
LON London
MAD Madrid
+1
PAR Paris
ROM Rome
BER Berlin
STO Stockholm
ATH Athens
+2CAI Cairo
JRS Jerusalem
MOW Moscow
+3
JED Jeddah
THR Tehran +3.5
DXB Dubai +4
KBL Kabul +4.5
KHI Karachi +5
DEL Delhi +5.5
KTM Kathmandu +5.75
DAC Dhaka +6
RGN Yangon +6.5
BKK Bangkok +7
SIN Singapore
+8
HKG Hong Kong
BJS Beijing
TPE Taipei
SEL Seoul
+9
TYO Tokyo
ADL Adelaide +9.5
GUM Guam
+10
SYD Sydney
NOU Noumea +11
WLG Wellington +12
PPG Pago Pago -11
HNL Honolulu -10
ANC Anchorage -9
YVR Vancouver
-8
LAX Los Angeles
YEA Edmonton
-7
DEN Denver
MEX Mexico City
-6
CHI Chicago
NYC New York -5
SCL Santiago
-4
YHZ Halifax
City Offset
YYT St. John’s -3.5
RIO Rio de Janeiro -3
FEN
Fernando de
Noronha
-2
RAI Praia -1
●
The information in the above table is current
as of January 2022.
●
Time zones may change and UTC
differentials may become different from
those shown in the table above.
Specifications
Accuracy at normal temperature :
±15 seconds a month
Timekeeping :
Hour, minute, second, month, day, day of
the week
a.m./p.m.(P)/24-hour timekeeping
Full Auto Calendar (2000 to 2099) *
* Year display on setting screen only.
Summer Time
Diving Function :
Dive time
Measuring unit: 1 second
Measurement range: 23 hours, 59
minutes, 59 seconds (24 hours)
Interval time
Measurement unit: 1 minute
Measurement capacity: 47 hours, 59
minutes (48 hours)
10 log memory records (dive start date
and time, dive time, interval time)
Tide Graph/Moon Graph function :
Tide Graph (with tide cycle display)
Moon phase display
Date selection
Time select (Tide Graph only)
World Time :
Current time display for 48 cities (31 time
zones) around the globe
Summer time
Alarm :
Time alarms
Alarms: 5 (with one snooze alarm)
Setting units: Hours, minutes
Alarm tone duration: 10 seconds
Hourly time signal: Beep every hour on the
hour
Watch Operation Guide 3521
19
To Next Page
Loading...
