E-9
Tap Operations
Tap indicator
The word “tap” in this manual refers to striking the center of
watch display with your fingertip.
Example:
Tap twice to stop an ongoing tone or vibration alert for a
watch alarm.
How to tap:
Lightly strike the watch display twice with the tip of your
finger. (double-tap)
Important!
• The tap function is enabled only while the Tap indicator is flashing on the watch
display.
• The Tap indicator flashes automatically whenever the tap function is enabled
and can be used to stop a watch alarm or time up alert, etc.
To Next Page
Loading...
