E-42
3
Use B and D to change the hours and minutes settings.
• Holding down either button scrolls the setting at high speed.
• To specify a start time of 100 hours, set the timer to 0H00'00".
4
After all the settings are the way you want, press A to exit the setting
screen.
To perform a countdown
The following shows button operations for a countdown.
D
D D D B
Start Stop (Restart) (Stop) Reset
Note
• A tone/vibration alert is performed for about 10 seconds when the end of the
countdown is reached, and the display returns to the screen that was shown
before the countdown was started.
To Next Page
Loading...
