Casio IT-G500

– 32 –
IT-G500

Y
Key Backlight
No. Operation Test Details
1
Select [4].Key Backlight. (MENU-3)
2
Press the “ENT” key. Check that the backlight turns ON.
3
Press the “ENT” key. Check that the backlight turns OFF.
The manual judgment screen appears.
If OK:
Press the “1” key to return to the menu screen.
If any problem:
Press the “0” key to return to the menu screen.

Y
Audio(Rec&Rep)
No. Operation Test Details
1
Select [5].Audio (Rec&Rep). (MENU-3)
Talk over the microphone of IT-G500. The input sound is output from the speaker.
Then, the manual judgment screen appears.
If OK:
Press the “1” key to return to the menu screen.
If any problem:
Press the “0” key to return to the menu screen.

Y
Speaker
No. Operation Test Details
1
Select [6].Speaker. (MENU-3) Speaker mode starts and a tone (3 kHz, 0.3 sec. duration) is
emitted in three volume levels, “small”, “medium” and “large” in
that order. This loop is repeated two times.
Then buzzer mode starts and a buzzer tone (10 kHz, 0.3 sec.
duration) is emitted in three volume levels, “small”, “medium”
and “large” in that order. This loop is also repeated two times.
Then, the manual judgment screen appears.
If OK:
Press the “1” key to return to the menu screen.
If any problem:
Press the “0” key to return to the menu screen.