To Next Page

To Previous Page

Phrases

BARGAIN DO NOT BEND

DUPLICATE FRAGILE

NO SMOKING SALE

SECRET SPECIMEN

Bar Code Specifications

*1 The check digit is automatically calculated in accordance with input data. For EAN-13, EAN-8, UPC-A, and ITF, the check digit is appended at the end of the

printed digits. For CODE39 and CODABAR, the check digit is appended one digit before the final digit (when a check digit is used).

*2 UPC-E includes a check digit, but it is not printed as a numeral below the bar code.

*3 The number of digits printed below a bar code equals the input characters plus automatically appended characters.

*4 An error message is displayed whenever there are insufficient digits. The unit will not allow input of too many digits.

*5 An error message appears and printing is impossible if an odd number of digits are input when an ITF check digit is not being used. Append a zero to the

beginning of the digits and re-input.

*6 An error message appears and printing is impossible if an even number of digits are input when an ITF check digit is being used. Append a zero to the beginning

of the digits and re-input

*7 Both the start code and end stop code of CODE39 must be asterisks.

*8 An error message appears and printing is impossible if any characters other than those specified here are used.

*9 With CODABAR, A, B, C, or D can be used as the start code and stop code. An error message appears and printing is impossible if any other character is used.

Troubleshooting

• Power Supply