Controlling the Keyboard Sounds
EN-10
Reverb adds reverberation to notes. You can change the
duration of the reverb.
1.
Press
3
(FUNCTION) a number of times until
“Reverb” appears on the display (page EN-4).
2.
Use the
bp
(10-key) [–] and [+] keys to select
the reverb setting you want.
A pedal can be used to change notes in various ways while
playing.
• A pedal unit does not come with the Digital Keyboard.
Purchase one separately from your retailer. See page EN-1
for information about options.
Connect an optional pedal unit.
1.
Press
3
(FUNCTION) a number of times until
“Jack” appears on the display (page EN-4).
2.
Use the
bp
(10-key) [–] and [+] keys to select
the pedal effect you want.
• The following shows the available pedal effects.
Using Reverb
Off (oFF) Turns off reverb.
1 to 10 The larger the number selected, the longer
the reverb duration.
Reverb
Reverb
Indicator disappears when
reverb is turned off.
Using a Pedal
Connecting a Pedal Unit
Selecting the Pedal Effect
Sustain
(SUS)
Sustains notes played while the pedal is
depressed. Organ and other similar tone
notes are sustained even if the pedal is not
pressed.
Sostenuto
(SoS)
Sustains notes that are playing when the
pedal is depressed before the keyboard
keys are released.
Soft
(SFt)
Slightly softens notes played while the pedal
is depressed.
Rhythm
(rHy)
Pressing the pedal starts and stops Auto
Accompaniment or song playback.
SUSTAIN jack
Jack
LK260_A5_x1a_EN_ES.indd 12 2014/02/21 15:07:00
To Next Page
Loading...
Need help?
General
Weight and Dimensions
