Need help?Do you have a question about the Casio MWA-800G and is the answer not in the manual?
General| Model | MWA-800G |
|---|---|
| Brand | Casio |
| Category | Watch |
| Case Material | Resin |
| Band Material | Resin |
| Movement | Quartz |
| Dial Color | Black |
| Band | Resin Band |
| Power Supply and Battery Life | Approx. battery life: 3 years on SR626SW |
| Glass | Mineral Glass |
| Accuracy | ±30 seconds per month |
| Stopwatch | 1/100 second stopwatch |
| Light | LED light |
| Calendar | Auto-calendar pre-programmed until the year 2099 |
| Other Features | 12/24-hour format |
| Display Type | Analog |
| Battery Life | 3 years on SR626SW |
| Water Resistance | 100 meters |
| Features | World time, stopwatch, alarm |
Procedure for adjusting watch accuracy using a capacitor/trimmer and quartz timer.
How to adjust accuracy by changing capacitance via pad selection on the PCB.
Method for adjusting analog watch accuracy by cutting lead wires on the PCB.
Detailed steps for safely pressing in a new glass and packing for water resistance.
Guide for removing and installing watch buttons, including E-ring mechanism and lubrication.
Procedure for using a water resistant tester to detect water penetration points by observing bubbles.
Instructions for operating an air leak checker for quick waterproof inspections.
Method for performing high-pressure waterproof tests and using a hot plate for condensation checks.
Flowchart for troubleshooting sensor/pressure issues using a dedicated trimming jig.
Flowchart for troubleshooting sensor/pressure issues without specialized trimming equipment.
Method for evaluating sensor/pressure quality by measuring resistance values.
To Next Page