— 2 —
120V
Power consumption In operation Max. 0.11A
Stand-by 0.07A
Mode SW OFF 0.06A
Memory protection Same as PCR-260
Clock and calender Same as PCR-260
Environment Same as PCR-260
Printer Same as PCR-260
Ink roller Same as PCR-260
Roll paper Same as PCR-260
Drawer S drawer (Coin 5/ Bill 4) DL-1319
PCR-255
3. OPTION (PCR-260/255)
• Wet cover WT-69
4. MAC OPERATION (Memory All Clear Operation)
1. Set the Mode Switch to OFF.
2. Plug the power cord of the ECR off an AC outlet.
3. Remove the memory protection batteries.
4. Leave the ECR a few minutes and plug the power cord into an AC outlet.
5. Set the memory protection batteries.
6. Turn the Mode Switch to REG position.
To Next Page
Loading...
Need help?
General
