EN-47
Configuring Settings
You can use the procedure below to return the Digital Piano’s stored data and settings to their initial factory defaults any time you
want.
1.
Hold down 3 FUNCTION.
2.
Press the A0 keyboard key.
This enters factory reset standby and causes the 3 FUNCTION light to flash.
• Step 3 below will execute the initialization operation. If you want to cancel initialization at this point, release
3 FUNCTION.
3.
To execute initialization, press the C1 keyboard key.
This starts initialization.
4.
Release 3 FUNCTION.
• The initialization operations takes some time to complete. Wait until initialization is complete. All front panel touch button
lights (3 FUNCTION to 8 GRAND PIANO) light when initialization is complete.
Factory Reset (Initialization)
To Next Page
Loading...
