E-54
7. Screen Capture
The screen image of the calculator can be captured as a bit pattern and transferred to your
computer.
Note
• For details on how to operate your calculator for screen capture, see the section of the
calculator’s User’s Guide titled “Data Communications.”
Capturing a Screen to Your Computer
u fx-9860G Series, fx-9750GII
1
. Connect the USB cable.
• This displays a pop-up window.
2
. Press 2(ScreenCapt).
3
. On the calculator, display the screen you want to transfer.
4
. On the FA-124 screen’s Calculator window, click .
5
. On the calculator, press !h(CAPTURE).
6
. The transferred screen capture will appear on the computer screen.
u fx-7400G
II
1
. On the FA-124 Link menu, select [Communications].
• This will display the port selection dialog box.
2
. Select the port where the calculator is connected (COM1 to COM9).
3
. Click [OK].
4
. Connect the SB-88 cable.
5
. In the LINK mode, press 6(CAPT)2(PC)J.
6
. On the calculator, display the screen you want to transfer.
7
. On the FA-124 screen’s Calculator window, click .
8
. On the calculator, press !h(CAPTURE).
9
. The transferred screen capture will appear on the computer screen.
To Next Page
Loading...
Need help?
General
