Casio PX-860 User Manual

as MIDI messages. The channel number of the sent message is in accordance with Instrument s part
numb er.
1.3.1 Auto Performance MIDI Send
This document describes what operation causes the transmission of each message. However, since there
are so many kinds of messages sent by the SMF player (PX-860,AP-460), this function is not mentioned
here as the operations.
2 Conditions that Disable Message Send and Receive
The main conditions when MIDI message send and receive are disabled by the Instrument are those
described below.
• While storage is selected as the USB device mode(PX-760/PX-860/AP-260/AP-460/PX-160)
3 Timbre Type Specific Operation
The operation that is performed for a received message depends on the current Timbre Type setting (see
 10.1 About Timbre Type ), which is the operation mode of each sound generator part. Applicable
information is provided in the explanations for each message.
7

Casio PX-860 Specifications

General

Keyboard	88 keys, Tri-sensor Scaled Hammer Action Keyboard II
Touch Sensitivity	3 sensitivity levels, Off
Sound Source	Multi-dimensional Morphing AiR Sound Source
Polyphony	256 notes
Tones	18 built-in tones
Recorder	2 tracks, 1 song, approximately 5, 000 notes total
Pedals	3 pedals (damper, soft, sostenuto)
Tuning Control	A4 = 415.5Hz ~ 440.0Hz ~ 465.9Hz
Speakers	12 cm x 2, 5 cm x 2
Amplifiers	20W + 20W
Digital Effects	Reverb (4 types), Chorus (4 types), Brilliance, DSP
Key Transpose	±2 octaves (-12 to +12 semitones)
Connectivity	USB to Host
Included Accessories	AC Adaptor, Music Stand