26. WRITE Down PLU number added to the Pulldown List
27. PRESS ESC ESC
28. PRESS Yes (1.Machine Feature)
29. PRESS Yes (1. Pulldown Group)
30. PRESS Arrow Down to desired Pulldown Group
31. PRESS Yes
32. PRESS Arrow Down to “YES”
33. PRESS Yes
34. PRESS Arrow Down to next available blank number
35. PRESS YES
36. PRESS YES (1.PLU)
37. PRESS Arrow Down to desired PLU to add to list
(number written down in step 26)
38. PRESS YES
39. PRESS ESC ESC ESC
40. PRESS Reg Mode to return to register operation
E. Creating Pulldown Groups (pop-up lists)
Please Note: When we originally setup your terminal we programmed it in a logical fashion to assist
with your programming. The first 50 items correspond to menu 1 of your terminal. The second 50
correspond to the 2
nd
menu etc. You will find the items for a pulldown group further down your
PLU list from 750, with a heading that is has a leading asterix. For example, if you have a pulldown
called Tap Other, further down your PLU list is 750 *Tap Other. Listed below this are all the items
that will pop-up under the Tap Other key. We strongly recommend that you continue to follow this
logic, as it will make reprogramming much simpler.
Step 1: Assigning the Pulldown Group to the Keyboard
1) PRESS PGM Mode
2) PRESS 6
3) PRESS PGM Mode
4) PRESS Yes
5) ARROW Down to Option 6. Key Feature
6) PRESS Yes
7) ARROW Down to Option 5. Function Key Feature
8) PRESS Yes (Report will print)
9) WRITE Down next available blank number on report
10) PRESS ESC ESC
To Next Page
Loading...
Need help?
General
