— 11 —
3-4. Message Table
Message Meaning Action
NO DATA!
NOT FOUND!
MEMORY FULL!
ALARM TIME
ALREADY
USED!
ALARM TIME
ALREADY
PASSED!
SECRET
DATA!
PASSWORD
MISMATCH!
TRANSMIT
ERROR!
DATA ERROR!
CONSULT
THE OWNER'S
MANUAL!
SAME TYPE
ALREADY
USED!
Search operation attempted when
no data is stored in memory.
Data specified in search operation
does not exist in memory.
No more room in memory for storage
of data.
Attempt to set a Schedule Keeper or
a Reminder Mode alarm time that is
already used for another entry.
Attempt to set a Schedule Keeper
alarm time for a time/data that is
already passed.
Alarm for a secret memory area
data item is sounding.
Attempt to enter the secret memory
area using a password that does not
match the one preset for the secret
area.
Error during data communications.
Data corrupted by strong impact,
electrostatic charge, etc.
Attempt to store a label that is
identical to one already stored.
Current search operation
cannot be performed.
Change specification or cancel
search.
Delete unnecessary data items
from memory.
Set a different alarm time or
change the existing alarm time
to another one.
Set a different alarm time (for a
future time/date).
Enter the secret memory area
to veiw details of the alarm.
Use the correct password.
Cancel the data communica-
tions operation and try again.
See page 12 of this manual.
Use a different label.
3-5. To adjust the display contrast
1. Enter the Telephone Directory Mode.
• You could enter any mode except the Calculator mode here.
2. Press CONT.
3. Use the and keys to adjust the contrast.
✻✻✻✻ CONTRAST ✻✻✻✻
(LIGHTER)
(DARKER)
CAPS
4. After you are finished, press ESC to clear the contrast adjustment display.
To Next Page
Loading...
Need help?
General
