E-15
Basic function
To use the cash register’s basic function
To set a paper roll
This Cash Register is tted with a thermal printer - only 58 mm wide thermal paper rolls can be used.
1 Open the printer cover by pushing OPEN button.
OPEN
2 Hold the paper roll so that the end of the paper comes out from the
bottom of the roll and place it behind the printer.
3 Place the end of the paper over the printer.
4 Close the printer cover slowly until it locks securely. Be sure that
both sides of the cover are fastened securely.
Important
• If the thermal paper roll is not properly installed, you will not be able to use the Cash Register. The
display shows ‟ ” to indicate that the paper is not inserted.
To Next Page
Loading...
Need help?
General
