Casio TE-2000 - Convenient Operations and Setups: Department Feature Programming (Batch); Batch Feature Programming for Departments

55
Convenient Operations and Setups
E
Department key feature programming
There are two different methods you can use to assign features to department keys.
With “Batch feature programming”, you can use a single operation to assign multiple features.
“Individual feature programming”, on the other hand, let you assign features one-by-one.
This method is recommended for programming of special features to individual department keys.
Batch feature programming
When using this procedure to assign multiple features to departments, use 9-digit codes that you create using the
following procedure
63s6 :::::;;:: 66s
{
}
& (Dept.1)
' (Dept.2)
:
. (Dept.24)
To other department key
D
9
D
8
D
7
D
6
D
5
D
4
D
3
D
2
D
1
Mode Switch
PGM
Negative department
Hash department
Single item sale
High digit limit specification
Taxable status 1
Taxable status 2
Taxable status 3
Taxable status 4
Always “00”
Group link (00 ~ 50)
a+b = :
D
9
:
D
8
:
D
7
a+b+c = :
D
6
:
D
5
;;
D
4
D
3
::
D
2
D
1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
Significant
number
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 4
Significant
numbers
a
b
a
b
c