— 42 —
[ 11 ] Backlight test
[Function]
This is a test for the LCD backlight.
The color of the backlight can be switched by this test and the switching of the backlight switch.
After this test, the test goes on to “Setting color of the backlight (2. Introduction [Others]).
[Operation]
Operation : c 0 1 2 1 SUBTOTAL
C : Designating the backlight color
0 = Batch test
The color changes as follows upon the press of keys.
White Green Red
1:OFF, 2:White, 3:Green, 4:Red, 5:(White + Green), 6:(Green + Red), 7:(White + Red)
[PRINT]
BACK LIGHT n0121
BACK LIGHT OK
END n0121
[ 12 ] 7 segment display test
[Function]
7 segments (LCD, Reared Disp) display test is performed.
Press any key to end the test.
[Operation]
Operation : 2 2 1 SUBTOTAL
Press any key to end the test.
[7 segment display]
The following is displayed and cleared after the test.
1 2 3 4 5 6 7 8 9 0
[PRINT]
DISP 7SEG 221
DISP 7SEG OK
END 221
To Next Page
Loading...
