Getting Started
TE-7000S User’s Manual
13
E
To install journal paper
Step 1
Remove the printer cover.
(If the cover is locked, unlock
by using the printer cover key
before this step.)
Step 2
Open the platen arm.
Step 3
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
Step 4
Put the leading end of the
paper over the printer.
Step 5
Close the platen arm slowly
until it locks steadily.
Step 6
Slide the leading end of the
paper into the groove on the
spindle of the take-up reel and
wind it onto the reel two or
three turns.
Step 7
Place the take-up reel into
place behind the printer,
above the roll paper.
Step 8
Press the | key to take up
any slack in the paper.
During machine
installation, press the |
key after power on.
Complete
Close the printer cover.
Locking platen
www.cashregisters.net
To Next Page
Loading...
