— 48 —
[ 7 ] CF-CARD WRITE/READ test
[Function]
This test will check the write/read test (connection test) for CF-CARD.
Perform the CF-CARD clear test, before start of this test.
Note that this test does not ensure the data inside the CF-CARD as well as its performance.
[Operation]
Operation : p n 0 1 3 SUBTOTAL
p : designates PCMCIA SLOT
0 = CF 1 = PCMCIA
n: 0 = One time check (can be omitted)
not 0 = Continuous check (To stop the test, press “Esc” key)
[LCD]
[PRINT]
CF-CARD pn013
CF WR OK
END pn013
CF-CARD pn013
CF WR OK
END pn013
NG and the address are displayed if WRITE cannot be
done normally.
NG and the address are printed if WRITE cannot be done
normally.
[ 8 ] CF-CARD READ ONLY test
[Function]
This test will check the read only test for CF-CARD.
Perform the CF-CARD write test, before start of this test.
Note that this test does not ensure the data inside the CF-CARD as well as its performance.
[Operation]
Operation : p n 1 1 3 SUBTOTAL
p: designates PCMCIA SLOT
0 = CF 1 = PCMCIA
n: 0 = One time check (can be omitted)
not 0 = Continuous check (To stop the test, press “Esc” key)
[LCD]
[PRINT]
CF-CARD pn113
CF RD OK
END pn113
CF-CARD pn113
CF RD OK
END pn113
NG and the address are displayed if READ cannot be done
normally.
NG and the address are printed if READ cannot be done
normally.
To Next Page
Loading...
Need help?
General
