— 49 —
[ 9 ] CF-CARD CLEAR test
[Function]
This test will check the clear test for CF-CARD.
Note that this test does not ensure the data inside the CF-CARD as well as its performance.
[Operation]
Operation : p n 2 1 3 SUBTOTAL
p: designates PCMCIA SLOT
0 = CF 1 = PCMCIA
n: 0 = One time check (can be omitted)
not 0 = Continuous check (To stop the test, press “Esc” key)
[LCD]
[PRINT]
CF-CARD pn213
CF CLR OK
END pn213
CF-CARD pn213
CF CLR OK
END pn213
[ 10 ] CF-CARD CLEAR WRITE/READ test
[Function]
The CLEAR & WRITE/READ test for CF-CARD is performed.
After deleting the memory by CLEAR, WRITE/READ test (connection test) is performed.
Note that this test does not ensure the data inside the CF-CARD as well as its performance.
[Operation]
Operation : p n 3 1 3 SUBTOTAL
p: designates PCMCIA SLOT
0 = CF 1 = PCMCIA
n: 0 = One time check (can be omitted)
not 0 = Continuous check (To stop the test, press “Esc” key)
[LCD]
[PRINT]
CF-CARD pn313
CF CLR&WR OK
END pn313
CF-CARD pn313
CF CLR&WR OK
END pn313
NG and the address are printed if CLEAR cannot be done
normally.
NG and the address are displayed if CLEAR cannot be
done normally.
NG and the address are printed if WRITE cannot be done
normally.
NG and the address are displayed if WRITE cannot be
done normally.
To Next Page
Loading...
Need help?
General
