19
To connect a memory card to the Data Projector
1.
Load the memory card into a USB card reader’s card slot.
For details about how to load a memory card into the USB card reader, see the user
documentation that comes with the reader.
2.
Connect the USB card reader to the Data Projector’s USB port.
To connect a digital camera to the Data Projector
1.
If necessary, configure the digital camera’s USB mass storage class setting.
2.
Turn off the digital camera and connect a USB cable to it.
3.
Connect the other end of the USB cable (Type A connector) to the Data
Projector’s USB port.
4.
Turn on the digital camera.
For details about steps 1, 2, and 4, see the user documentation that comes with your digital
camera.
To Next Page
Loading...
Need help?
General
