Casio XJ-A256

Other manuals for Casio XJ-A256

Questions and Answers:

T
tylerjonesAug 15, 2025
Why does my Casio XJ-A256 Projector wireless LAN connection keep dropping?
- M
  Michelle SingletonAug 15, 2025
  If your wireless LAN connection between the projector and computer is unstable, there are a few things to consider. First, if you're running any other wireless LAN utility besides Wireless Connection 3 on your computer, close it. Second, the projector and computer may be too far apart, or there might be a physical obstacle like a wall between them. Try moving them closer or removing the obstacle. Finally, a nearby microwave oven, Bluetooth device, or other device could be interfering with the wireless LAN signal. Try relocating the interfering device.
K
Kara WillisAug 18, 2025
What to do if computer screen won't project from Casio XJ-A256?
- N
  Natalie MillerAug 18, 2025
  If you've successfully established a wireless LAN connection but the computer screen contents won’t project, ensure that 'Wireless' is selected as the input source by pressing the [INPUT] key on the projector. If 'Wireless' is already selected, click the button on the computer’s Wireless Connection 3 window. Also, if the projection image has been frozen or cut off, press the [ESC] key to cancel the freeze/blank operation.
D
Danielle Mitchell PhDAug 21, 2025
How to fix Casio Projector when [Reconnect] remains on the Wireless Connection 3 window?
- C
  Christina TerryAug 22, 2025
  If the '[Reconnect]' message persists and your computer won’t connect to the projector, try the following: - Close any other wireless LAN utilities running on your computer besides Wireless Connection 3. - Move the projector and computer closer to each other, removing any obstacles like walls. - Relocate any nearby devices that could be interfering with the wireless LAN signal, such as microwave ovens or Bluetooth devices. - Ensure the projector is turned on. - Enable the computer’s wireless LAN function, if it is disabled. - Check that the computer’s wireless LAN function satisfies the required 'Wireless LAN' conditions under 'Minimum System Requirements'.
J
Jessica HamptonAug 25, 2025
What to do if Casio XJ-A256 Projector power has turned off automatically due to internal overheating?
- E
  Emily ScottAug 25, 2025
  If your Casio Projector's power has turned off automatically because of internal overheating, follow these steps: 1. Check the projector’s intake and exhaust vents for any blockages, ensuring sufficient space around the unit. 2. Remove any dust accumulated around the intake and exhaust vents. If the vents are clear, confirm the POWER/STANDBY indicator is lit amber (without flashing), and then turn the power back on. If the error repeats upon restart, it indicates a deeper issue.
J
Jennifer JacksonAug 27, 2025
Why Projector List dialog box won't display in Casio XJ-A256 Projector?
- A
  alanhansenAug 27, 2025
  If Wireless Connection 3 is running but the Projector List dialog box doesn’t appear, first make sure all of the projectors are turned on. Then, check that all of the projectors have wireless adapters installed. Also, if the projectors and computer are too far from each other, or there is a physical impediment, move them closer and/or remove the impediment. Finally, relocate any nearby microwave ovens, Bluetooth devices, or other devices that may be interfering with the wireless LAN signal.
V
valenciastephenAug 30, 2025
How to improve slow projection image switching on Casio Projector?
- S
  simpsontraceyAug 30, 2025
  To improve slow projection image switching, check the projector’s 'Projection Setting'. If 'High-resolution' is selected, change the setting to 'High-speed'. Also, if your computer is running Windows Vista or Windows 7, try disabling Windows AeroTM.
L
Lindsay SinghSep 2, 2025
What to do if System Admin front page doesn't appear on Casio XJ-A256 Projector?
- M
  Matthew MorrisonSep 2, 2025
  If the System Admin front page does not appear when you enter the projector's IP address in your web browser, reconnect the wireless LAN between the projector and computer if the connection was terminated. Also, the browser you are using may be configured to use a proxy server. Disable the proxy server configuration.
L
Lisa KellySep 5, 2025
Why isn't the SSID of my Casio XJ-A256 Projector showing on the Projector List?
- S
  Stacy RamosSep 5, 2025
  If the SSID of the projector you want to connect to is not listed in the Projector List dialog box, check the 'SSID Broadcast' setting of the projector. If it is set to 'Disable', change it to 'Enable'. Also, ensure that the projector is turned on.
R
ramirezlisaSep 8, 2025
How to display username when projecting from a computer on Casio Projector?
- M
  mbrownSep 8, 2025
  To display the user name when projecting from a computer, make sure that 'On' is selected for the 'Show User Name Display' item on the System Admin page 'Setup' screen.
W
William DavisSep 12, 2025
Why System Admin page does not appear from Wireless Connection 3 on Casio XJ-A256 Projector?
- J
  joe81Sep 12, 2025
  If the System Admin page does not appear when you try to access it from Wireless Connection 3, it might be because the browser you are using is configured to use a proxy server. Since a proxy server configuration can prevent access to the System Admin page, you should change your browser configuration.

Casio XJ-A256 Specifications

General

Matrix size	0.65 \
Number of colors	16.78 million colors
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	2000:1
Screen size compatibility	18 - 300 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	±30 °
Aspect ratio	16:10
RS-232 ports	1
Offset	84 %
Throw ratio	1.15 - 2.3:1
Optical zoom	2 x
Zoom capability	Yes
Focal length range	- mm
Service life of light source	20000 h
Full HD	No
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1280 x 800 (WXGA)
RMS rated power	1 W
USB connector type	USB Type-A
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
Wi-Fi standards	802.11b, 802.11g
Noise level	35 dB
Noise level (economic mode)	29 dB
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, ITA, JPN, KOR, SWE
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	110 W
Power consumption (typical)	210 W
Power consumption (PowerSave)	0.4 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, Composite, VGA

Weight and Dimensions

Depth	210 mm
Width	297 mm
Height	43 mm
Weight	2300 g

Summary

Projector Overview

Key Projector Features

Details key features like hybrid light source, slim design, HDMI input, and wide projection range.

Remote and Projector Controls

Explains the functions of all buttons on the remote controller and projector unit.

Projector Terminal Ports

Identifies and describes the various input/output ports on the projector's rear panel.

Remote Battery Installation

Step-by-step guide for installing batteries into the remote controller.

Projector Setup Guide

Provides guidance on projector placement, ventilation, and initial setup.

Important Setup Precautions

Highlights essential precautions for safe and optimal projector setup and operation.

Connecting Devices

Connect Analog RGB

Step-by-step guide for connecting a computer's analog RGB output to the projector.

Connect HDMI

Instructions for connecting video devices or computers via HDMI for audio and video output.

Connect Video Devices

Details connections for composite and component video outputs from video devices.

Projector Operation

Input Source and Resolution Settings

Guide to selecting input sources and understanding resolution compatibility for optimal display.

Image Adjustments

Covers adjusting brightness, keystone correction, color mode, and image zooming.

Advanced Projection Features

Explains image freezing, blank screens, pointer display, and aspect ratio adjustments.

Audio, Timer, and Eco Mode

Covers volume control, presentation timer settings, and power-saving Eco Mode options.

Using the Function Key

Describes how to use the Function key for quick access to common operations.

Configuring Advanced Settings

Basic Setup Menu Operations

Explains how to navigate and use the projector's main setup menu for configuration.

Direct Power On Feature

Details how to enable automatic projector power-up when connected to a power source.

Projector Password Protection

Instructions for setting up and managing password protection to prevent unauthorized use.

Restore Factory Defaults

Procedures for resetting projector settings to their initial factory default states.

Cleaning and Maintenance

Cleaning Exterior and Lens

Guidelines for safely cleaning the projector's exterior casing and projection lens.

Cleaning Vents

Instructions for cleaning dust from projector vents to prevent overheating and ensure performance.

Troubleshooting

Understanding Status Indicators

Explains the meaning of status indicators (Power, Light, Temp) during normal and error states.

Error Messages and Warnings

Details projector error messages and the corresponding required actions for resolution.

Troubleshooting Common Issues

Provides solutions for common projector problems like no image, abnormal display, or no sound.

Appendix

Remote Signal Range

Illustrates the effective operating range and angles for the remote controller.

Projection Distance and Size Chart

Table showing the relationship between projection distance and the resulting screen size for different models.

Supported Signal Formats

Lists the various RGB, Component, Video, and HDMI signal formats supported by the projector.

Technical Specifications

Technical specifications including brightness, DLP chip details, lens, light source, terminals, and languages.

Related product manuals

Casio XJ-A130V SERIES

32 pages

Table of Contents

Other manuals for Casio XJ-A256

Questions and Answers:

Casio XJ-A256 Specifications

Summary

Projector Overview

Key Projector Features

Remote and Projector Controls

Projector Terminal Ports

Remote Battery Installation

Projector Setup Guide

Important Setup Precautions

Connecting Devices

Connect Analog RGB

Connect HDMI

Connect Video Devices

Projector Operation

Input Source and Resolution Settings

Image Adjustments

Advanced Projection Features

Audio, Timer, and Eco Mode

Using the Function Key

Configuring Advanced Settings

Basic Setup Menu Operations

Direct Power On Feature

Projector Password Protection

Restore Factory Defaults

Cleaning and Maintenance

Cleaning Exterior and Lens

Cleaning Vents

Troubleshooting

Understanding Status Indicators

Error Messages and Warnings

Troubleshooting Common Issues

Appendix

Remote Signal Range

Projection Distance and Size Chart

Supported Signal Formats

Technical Specifications

Related product manuals