46
Changing the Audio Input
Though the image input terminal of each input source is fixed, audio input terminal assignments can
be changed by you as desired.
To do this: Perform this operation:
Change the audio input for a
particular input source
1. Press the [MENU] key to display the Setup Menu.
2. Select the following in sequence, and then press the [ENTER] key: “Option
Settings 2”, “Audio Input”.
3. Use the [] and [] keys to select the input source whose audio input setting
you want to change.
4. Use the [] and [] keys to select the audio input you want to assign to the
selected input source.
5. Repeat steps 3 and 4 as required.
6. After the settings are the way you want, press the [MENU] key to exit the Setup
Menu.
Return audio inputs for all the
input sources to their initial
default settings
On the Setup Menu, perform the following operation: “Option Settings 2”, “Initialize
Projector Options 2”.
Note that this returns all items included on the “Option Settings 2” menu (not
just audio input settings) to their initial default settings.
To Next Page
Loading...
Need help?
General
