To Next PageTo Next PageHow to fix a Casio XJ-M250 Projector when the power does not turn on?
If the POWER/STANDBY indicator is not lit, ensure the AC power cord is correctly connected. If the TEMP or LIGHT indicator remains flashing or lit, consult the “Error Indicators and Warning Messages” in the User’s Guide.
What to do if my Casio XJ-M250 Projector shows no image or an abnormal image?
If no image is projected or the projected image is abnormal on your Casio Projector, first ensure that the connected computer or video device is turned on and outputting a video signal. Next, select the correct input source on the projector that corresponds to the connected device. If you're using the component output terminal of a video device, connect it to the VIDEO or S-VIDEO terminal of the projector instead of the COMPUTER IN terminal.
Why is there no sound coming from my Casio XJ-M250 Projector?
If there is no sound from your Casio Projector, first check the volume level on the projector itself by pressing the remote controller [VOLUME] key and using [T] and [S] to adjust the volume level. Also, verify that the volume level of the device connected to the projector is not too low and that it is outputting audio. Ensure the audio output of the connected device is correctly connected to the projector’s AUDIO IN terminal or AUDIO IN L/R terminal. Finally, make sure the “Audio Out” setting is set to “Speaker” and not “Line” in the setup menu “Option Settings 2 J Audio Out”.
How to fix blurry text on a Casio XJ-M250 Projector?
If the text is blurry on your Casio Projector, rotate the focus ring to focus the image. If that doesn't work, press the [AUTO] key to execute an automatic adjustment. If the issue persists, the frequency and phase may need adjusting in the “Image Adjustment 2 J Frequency” and “Image Adjustment 2 J Phase” settings on the setup menu. If the input source is a video camera or document camera, check to make sure there is no problem with the input source device.
Why does the remote controller not work with my Casio Projector?
If the remote controller for your Casio Projector isn't working, first replace the batteries. If that doesn't solve the issue, ensure you are operating the remote controller within the allowable range of the projector.
What to do if my Casio Projector has a strange color display?
If you're seeing strange colors on your Casio Projector, the input signal may not match the projector settings. Try adjusting the image brightness using the [BRIGHT] key, changing the color mode using the [COLOR MODE] key, or adjusting the projection image color balance using “Image Adjustment 1 J Color Balance” in the setup menu.
What to do if my Casio XJ-M250 asks for a password?
If the message “Please input the password.” appears on your Casio Projector, the “Option Settings 1 J Power On Password” setting on the setup menu is turned on, meaning the projector is password protected. Input the correct password, and then press the [ENTER] key.
How to change the language on a Casio XJ-M250?
To change the language on your Casio Projector, follow these steps: 1. Press the [MENU] key to display the setup menu. 2. If the input signal is HDMI, press [T] four times and then press the [ENTER] key. If the input signal is not HDMI, press [T] five times and then press the [ENTER] key. 3. Display the language selection menu. If the input signal is RGB, press [T] six times and then press the [ENTER] key. If the input signal is not RGB, press [T] five times and then press the [ENTER] key. 4. Use the [T] and [S] keys to move the highlighting to the language you want to select and then press the [ENTER] key. 5. Press the [MENU] key to exit the setup menu.
Why won't the light source unit light on my Casio Projector?
If the light source unit in your Casio Projector does not light, it has likely reached the end of its service life or is malfunctioning. Contact your original dealer or an authorized CASIO service center for replacement.
General| Matrix size | 0.65 \ |
|---|---|
| Number of colors | 16.78 million colors |
| Projection distance | 1 - 4.9 m |
| Projection technology | DLP |
| Contrast ratio (typical) | 1800:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, vertical | ±30 ° |
| Power LED | Yes |
| Aspect ratio | 16:10 |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 311 x 82 x 244 mm |
| Connectivity technology | Wired |
| Focus | Manual |
| Offset | 83 % |
| Throw ratio | 1.32 - 1.93:1 |
| Optical zoom | 1.5 x |
| Focal length range | - mm |
| Light source type | LED |
| Service life of light source | 20000 h |
| DVI port | No |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Component video (YPbPr/YCbCr) in | 0 |
| Analog signal format system | NTSC, PAL 60, PAL M, PAL N, SECAM |
| Supported graphics resolutions | 1280 x 800 (WXGA), 1600 x 1200 (UXGA) |
| RMS rated power | 5 W |
| Placement | Ceiling |
| Product color | White |
| Power source | AC |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 190 W |
| Noise level | 33 dB |
| Noise level (economic mode) | 28 dB |
| On Screen Display (OSD) languages | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POR, RUS, SWE, TUR |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Cables included | VGA |
Weight and Dimensions| Weight | 3900 g |
|---|
Explains safety symbols, icons, and general usage precautions for safe operation.
Covers safe handling of power cords and avoiding water or foreign objects.
Warns against modification and advises on actions after drops or impacts.
Safety related to disposal, vents, location, and physical placement.
Detailed safety for batteries, including handling, replacement, and disposal.
Safety precautions for viewing 3D images, including age and health considerations.
Information on the laser/LED light source, its life, and warranty.
Warnings regarding the Class 1 laser device and potential hazards.
General precautions, screen dot explanation, and handling impacts during projection.
Adjusting image quality, handling hot projector, storage, and cleaning procedures.
Lists all items to check when unpacking the projector.
Provides an overview of the projector's parts and features.
Instructions for inserting batteries into the remote controller.
Guidance on placing and orienting the projector for optimal projection.
Precautions for placement and instructions for adjusting the projector's tilt.
Step-by-step guide to turn on the projector and begin projection.
Instructions for using zoom and focus rings to adjust the projected image.
Step-by-step guide to power off the projector.
Steps to open and read PDF user guides from the CD-ROM.
Information on installing software from the CD-ROM for USB models.
Explains the meaning of the projector's status indicator lights.
Solutions for power issues and problems with image projection or display.
Troubleshooting for abnormal image color and incorrect menu language settings.
Advice on sound problems and other common operational issues.
Solutions for image quality issues like color and blurriness, and remote control malfunctions.
Resolving password prompts, error indicators, and light source unit failures.
Lists technical specifications like brightness, environment, power, dimensions, and weight.
